Magnetic Application


		Magnetic Assemblies

		Alnico Magnets

		Ceramic Magnets

		Compression Bonded Neodymium

		Injection Molded Neodymium and Ferrite

		Samarium Cobalt

		Sintered Neodymium

		Flexible Magnets

	·	About EA Magnetics
	·	Case Studies
	·	Quality Certifications
	·	Product Photos
	·	Download Library

	·	Magnetic FAQs -
	·	Magnetization Options
	·	Price quote -
	·	Contact us with inquiries -
	·	Register for total access...

EA Magnetics - Magnetic Case Studies

EA Magnetics - Product Information APPLICATION CASE STUDIES
Return to Page	Case Studies Table of Contents	Your Project

	CASE STUDY: Pertains to: Injection Molded Neodymium Download this case study as a PDF - EAM-Case-Study-003.pdf - 446Kb Postage Machine Manufacturer Improves Design with EAM’s Advanced Injection Molding and Magnetization Technology . . .
	Small magnets for a big job.	Technology that other vendors couldn't supply was developed by EAM. Here's what we did to provide the solution... One of the largest postage machine manufacturers in the world contacted EAM concerning a new design they were hoping to implement. This design required a magnet with extraordinary capabilities, however, they were unable to find a company to design and produce such a part.
	Working in conjunction with our joint venture partners who design and manufacture complex magnetizing fixtures, EAM was able to create two injection molded neodymium parts that met the very specific requirements of this demanding application.

	The Problem: This design also required a magnet that would activate a sensor and measure the thickness of the paper as it ran through the machine. For this, a magnet was required with 5 uneven poles on one surface of a very small — yet powerful — part. No other company they contacted was able to meet these specifications. The Solution: Again, EAM designed the appropriate magnetizing fixture from scratch, and as a result was able to provide the magnet the customer needed at the price that they wanted.

	The Problem: The design depended on a rotary sensing device which works in conjunction with a hall effect probe to monitor the flow of paper through the postage machine. In order to work as designed, the magnet would need to have 40 poles on only a one inch diameter magnetic surface. It would also have to be very powerful. No manufacturer contacted was able to deliver a part that combined the required magnetic strength with extremely tight pole definition. The Solution: EAM desiged a rotary magnet with the required field strength - while maintaining the definition between the 40 poles on the one inch face of the part. We were also able to reduce the amount of neodymium powder necessary to create the magnet itself - producing significant cost savings.

	Time to rethink things? Our application experts routinely re-examine and re-design parts that can make all of the difference, in production, after-sale reliability and your bottom line. Contact us with your requirements!

EA Magnetics supplies magnets and magnetic assemblies to OEMs in all types of industries. Alnico, bonded ferrite, ceramic magnets, flexible magnets and magnet components for electronics and actuating devices. Our manufacturing capabilities include advanced magnetic modeling and characterization software to provide optimal support and engineering for sintered rare earth magnets, injection molded magnetic assemblies, rare earth magnets, samarium cobalt magnets, and technical magnets for all requirements.

Eneflux Armtek Magnetics, Inc - 6 Platinum Court - Medford, NY 11763 USA
Toll-Free (800) 2ARMTEK - (800) 227-6835 - Tel: (215) 504-1000 - Fax: (215) 504-1001 · info@EAMagnetics.com